|
 Save money , time and hassle by reducing or eliminating contaminants before they get into your spa.
“Perfect water with every fill!”
Solves most initial Spa water problems caused by:
- Dissolved heavy metals
- Lime and Scale
- Organic contaminants and VOC’s
- Hydrogen Sulfide (rotten egg smell)
Plus hundreds of other common water contaminants!
ecoONE® Pre-Filter Technical Specifications
The ecoONE® Pre-Filter solves most startup spa and pool water problems without the use of chemicals. Saves money time and hassle by removing or reducing most common water contaminants before they get into your pool or spa.
The ecoONE® pre-filter has hundreds of other useful household applications for flower and vegetable gardeners, pond pre-treatment, bird baths, pet water, fish tanks, lawns, car washing, etc.
The convenient design will work on either end of a standard garden hose.
Technical Data:
When tested against the National Sanitation Foundations Standard No. 53 “Drinking Water Treatment Units – Health Effects” the ecoONE® Pre-Filter water treatment unit met all requirements of the standard.
Unit size/weight:
2 ½” X 10” with FPT inlet/outlet; weight: 1 ¼ lbs
Filter Media Test:
Input turbidity: 12 TU
Effluent turbidity: Initial: 0.8 TU
Effluent turbidity: 50%: 0.9 TU
Unit test:
Model: ecoONE® Pre-Filter
Capacity: Up to 8,000 Gallons (depending on source water quality)
Flow Rate: 2 GPM
Temp range: 35F-100F
Working pressure range: 20-100 psi
The ecoONE® Pre-Filter is a combination of granular activated carbon (GAC) and a patented reduction/oxidation media that is classified by the EPA as a bacteriostatic. The combined media reduces or eliminates these contaminants:
|
Heavy metals:
Mercury
Lead
Iron
Copper
Cadmium
Barium
Chromium VI
Chromium III
Salenium
|
Other Contaminants:
Volatile Organic Contaminates (VOC’s)
Hydrogen sulfide
Chlorine and its byproducts (THM’s)
Fluoride
Nitrate
Arsenic
Endrin
Lindane
Methoxychlor
Toxaphene
Silvex
|
|
The ecoONE® Pre-Filter has been tested to applicable NSF 42 & 53 standards by an independent lab to reduce and/or eliminate all contaminants listed. There are hundreds of other contaminants that the filter reduces and/or eliminates.
Calcites and lime/scale:
The ecoONE® Pre-Filter alters the molecular structure of calcite which inhibits its clinging capability. Calcium ions are removed from the water which changes calcite lime/scale deposits into aragonite. This alteration causes the lime/scale to remain suspended in the water where it cannot cling to equipment.
Materials:
All materials used in the ecoONE® Pre-Filter are approved by the FDA for contact with foodstuffs including potable water. All thermoplastic/thermoset plastics used comply with the NSF standard 14.
“Simplify Your Spa... Naturally”
|
